Category Archives: Technology

What’s Your Grip Size? Grips are often over looked, but can have a profound impact on performance. There are only 3 golf club components: head, shaft & grip. In order to achieve desired grip size the following information must be taken into account: Grip Core Size & Shaft Butt Diameter Grip Material Volume When grip … Continue reading How To Achieve Desired Grip Size →

Mitchell Golf Technology All Mitchell Golf Equipment Company products are engineered, manufactured, and assembled at our plant in Albion, Michigan, U.S.A. Five patents and 3 trademark registrations protect the intellectual property rights of our products. STEELCLUB® Angle Machines changed golf club technology just like the Golf Pride slip-on replacement grips did. The design unlocked the … Continue reading About Our Technology →

By: Ed Mitchell, PGA Mitchell® Publishing Company In 1962 I embarked upon a golf professional career at a time in golf history when innovation in golf club technology was slow coming at best. The biggest innovation in the game at that time was the ever-increasing popularity of Cushman riding golf carts. But the innovation that caught … Continue reading Technology That Works →

Frequency is an absolute measure of the flex of a shaft. It is defined as how many times per minute a shaft oscillates. The units of frequency measurement are known as cycles per minute, or cpm. A shaft with a higher frequency is stiffer than one with a lower frequency. By using frequency as a … Continue reading Shaft Frequency: An Absolute Measurement For Shaft Matching →

The rules of golf state “The shaft shall be straight, with the same bending and twisting properties in any direction and at any point along its length, the shaft shall: (i) bend in such a way that the deflection is the same regardless of how the shaft is rotated about its longitudinal axis; and (ii) … Continue reading Measuring Symmetrical Shafts →

Interpreting Impact Marks On Iron Soles The following diagrams illustrate the range of patterns for typical lie imprints. Note that the imprint illustration moves from the leading edge to the rear of the club’s sole. This indicates that the clubface is closed on the leading edge and open on the rear edge. Further note that … Continue reading Dynamic Lie Fitting →

After removing the ferrule, load the club into the puller with the hosel of the club against the hosel stop. After clamping the shaft securely, turn the club head pulling T-Handle to apply a slight amount of pressure against the hosel. Then apply heat to the hosel with either a propane torch or heat gun. … Continue reading How To Use A Graphite Shaft Puller →

The latest trend in the makeup of golf club sets is to replace the long irons with hybrid utility clubs. The most overlooked specification when purchasing a hybrid is its lie and the effect it’ll have on club performance. Some hybrids have rounded soles but that does not mean one lie angle fits all golfers. … Continue reading The Importance of Properly Fit Lie Angles in Hybrid Clubs →